Linksys WRT54GP2
The Linksys Wireless – G Broadband Router with 2 Phone
Ports is a kind of "splitter" for your Internet
connection. Just connect your DSL or Cable Modem to the Router,
and all the computers in your home or office can share the
Internet -- all at the same time. The built-in 3-port switch
lets you attach three local PCs directly, or daisy-chain out
to more hubs and switches as your network grows.
The two standard telephone jacks on the Router enable our
high-quality feature-rich telephone service through your high-speed
connection even while you're surfing the Internet. Each phone
jack operates independently -- like having two phone lines.
STEP 1
Connect ethernet cable from your PC to one of the 3 LAN ports
of the router. Then connect your cable of DSL modem's Ethernet
cable to the Router's Internet port. If necessary, disconnect
the RJ-11 telephone cable of your telephone from the telephone
wall jack. Then connect that end to the Router's Phone 1 port.
If you have a second telephone plug that into Phone 2 port.
Now, power up your PC, Cable and DSL modem and your Linksys.
STEP 2
You will need the setup instructions provided by your Internet
Service Provider (ISP). If you do not have this information,
then contact your ISP before continuing.
The instructions from your ISP tell you how to setup your
PC for Internet access. Because you are now using the Router
to share Internet access among several computers, you will
use the setup information to configure the Router instead.
STEP 3
Make sure that your PC's Ethernet adapter is set to 'Obtain
an IP Address Automatically'
Open your browser and enter 192.168.15.1. When the login screen
appears, enter 'admin' for username and 'admin' for password (please contact Rubicon Tech Support at support@rubiconnetworks.com for username and password).
STEP 4
A setup page will appear. Choose the Internet connection
type depending on how your ISP assigns you your Internet Protocol(IP)
number. When you have finished your settings click on 'Save
Settings'. When your Router Setup screen comes back up, you
should be able to browse the Internet from your PC. If not,
contact your ISP.
STEP 5
Next, choose from the main menu 'Voice' and then Line1 .
Enter your IP Net virtual number into the User Id field
and IP Net SIP password into the Authenticate Password field.
Enter sip.myvoipaccount.net into Registration/Proxy Server field.
Repeat Step 5 for line 2.
STEP 6
For the best voice quality, leave the Voice Quality at default.
If you have limited bandwidth choose G.729. Do not choose
G.723 as it is not supported by IP Net.com.
STEP 7
Save settings.
STEP 8
Make calls!
|
